The working environment in mines is harsh, especially in the cold winter, and the temperature at the wellhead is unbearable for miners. The use of wellhead warm air blowers provides miners with a warm working environment and effectively improves work efficiency. To ensure the normal operation of the wellhead heater, the following is a comprehensive guide for daily maintenance of the wellhead heater, helping you easily cope with the working environment in the mine.
The wellhead heater mainly heats the air and then sends the hot air into the mine to improve the working environment of the mine. Understanding its working principle helps us to better carry out daily maintenance.
Key points for daily maintenance
Check the power supply line: The power supply line is the foundation for the operation of the wellhead heater. It is necessary to regularly check whether the power supply line is aging, damaged, and whether the plug and socket are in good contact. If there is any abnormality, it should be replaced in a timely manner to ensure the safety of the power supply circuit.
Clean air filter: The air filter is a key component to ensure the normal operation of the heater. Every once in a while, the air filter needs to be removed for cleaning. If the filter screen is found to be damaged, it should be replaced in a timely manner.
Check the heating element: The heating element is an important part of the heater and should be checked for proper operation. If carbon deposits or oxidation are found on the surface of the heating element, it can be lightly sanded with fine sandpaper to restore its good performance.
Check the operation status of the fan: The fan is the air supply device of the heater, and it is necessary to ensure that the fan runs smoothly without abnormal noise. If a decrease in fan speed or abnormal noise is found, the cause should be promptly investigated and repaired.
Check the temperature control system: The temperature control system is responsible for adjusting the supply air temperature of the heater. Check if the temperature sensor is sensitive and if the control circuit is functioning properly. If there is a malfunction, it should be adjusted or replaced in a timely manner.
Check the anti freezing device: In cold regions, the wellhead heater needs to be equipped with an anti freezing device. Check if the antifreeze device is working properly to ensure that the heater is not affected in low temperature environments.
Regular maintenance
Lubrication and maintenance: Regularly add lubricating oil to fan bearings, motors, and other components to reduce wear and extend service life.
Appearance inspection: Check the appearance of the heater to ensure that there is no damage, deformation, or other phenomena. If any, it should be repaired in a timely manner.
Through the above daily maintenance guide for the wellhead heater, we believe you have mastered the key to improving the working environment in mines. Regularly inspecting and maintaining the warm air blower at the wellhead can not only ensure the normal operation of the equipment, but also provide a warm and comfortable working environment for miners, and improve the production efficiency of the mine. Let's work together to contribute to the improvement of the working environment in mines.
Comment